Sunday, September 11, 2011

Selecting a Boat That's Right For You


Living in Florida without a boat is like living in Colorado without snow skis...but it's a heck of lot easier selecting snow skis than it is a boat!

There so many different makes, models and styles of boats available that it can make your head spin! It's very easy to end up spending a lot of unnecessary time and money traveling to see boats that look attractive in style and price, but are really not the boats that are right for your needs. The very first step to get started in the right direction is to know exactly what type of boating you plan on doing and how you realistically plan on using the boat. Ask yourself these questions...

Are you more interested in a Powerboat or in a Sailboat? If you live in a shallow water area, remember that sailboats require more depth to operate.

Where exactly do you plan on doing most of your boating adventures?

Do you intend on taking short weekend trips and spending just a night or two on the boat?

When you head out to go boating, how many people do you plan on taking with you each time?

Do you intend to do lots of long range boating spending weeks at a time on your boat?

Are you planning on simply entertaining friends and family for some day boating sightseeing adventures?

Do you need a boat that you can waterski or wakeboard behind and if so, how many people to you plan on taking with you?

Do you feel that you will be using the boat primarily for Offshore Deep Sea Fishing?

Would you prefer a boat that enables you to Cruise and Fish?

Are you planning to primarily do backwater saltwater / fresh water fishing in more shallow waters?

How are you planning to store your boat? (Inside Dry Rack Storage - In the Water at a Dock - On a Boat Lift - On a Trailer)

Do you need a trailer with your boat? If so, the beam of the boat is something to consider so contact your local DMV regarding trailering requirements.

If you're considering smaller boats in the 18' to 24' size range, many people would like a Cuddy Cabin to get out of the sun or rain. However, here in Florida unless you have a generator with air conditioning a Cuddy Cabin boat is not really that practical especially in Florida's hot Summer months. You can plug in 12 volt isolating fans and open the cabin hatch(s), but it still can get pretty darn hot in the cabin. In addition, having a small Cuddy Cabin will limit the number of passengers you can take with you on the boat since you lose a large part of the outside seating areas compared to a Bowriders or a Deck Boat. If having a privacy head is the only reason for your considering a Cuddy Cabin, it's important to know that many small Bowrider models have a locking privacy head and locking dry storage area compartments as well.

Once you know exactly how you plan on using the the boat, you're half way there! The next step is to decide on a budget that you would like to keep within and be sure to realize that there will be State Sales Tax added to your purchase and you will need to insure the boat as well. Having a Certified Marine Surveyor inspect the boat before closing is something that we always suggest to our clients. In addition, if you are financing the boat, most finance companies will require a Certified Marine Survey Inspection on the vessel and the time to have the inspection conducted is before closing on the boat, not after.

Our Sales Team at GOLDEN GATE BOAT SALES knows all of the right questions to ask when inquiring on boats for our clients. It's real easy to spend a lot of time and money going after boats because they appear to have a good value...but instead have known issues with particular makes and models that you may not be aware of. GOLDEN GATE BOAT SALES offers a FREE YACHT & BOAT SEARCH page at our web site. This is not a general computer search scan that sends you automated results. When you utilize our free Find a Boat page, we research each and every boat before sending the vessel specifications and photos to you for consideration. Our goal is to get you into the right boat at a price we know we can get you out of without taking a big hit (if any) when you're ready to move up in size or into a newer boat down the road. We handle all of the negotiations to help land the lowest possible purchase price, the closing process, and assist you with delivery and financing if needed. Please take a moment to view what our customers have to say about us along with our credentials at this this link. Our goal is is to make your boating dreams become reality!

We hope you found this article helpful and welcome your comments and questions to share with our boating community.

   









Saturday, September 10, 2011

How Much is My Boat Worth?


Finding out how much your boat is worth is not an easy task, especially in this economy! Guessing is obviously not the way to go, although many folks do just that and end up selling for much less than necessary by panic selling.

Some important factors that we take into consideration when giving a Free Boat Market Evaluation are; the overall realistic condition compared to other similar vessels that we have recently sold; availability of service records; the location; how soon the owner wants the boat sold; how often the boat is used and dozens of other important factors about the vessel are taken into consideration as well. Some boat sellers think that because they have top of the line FURUNO Electronics on their Motor Yacht that it drastically increases the value of the vessel. This is simply not the case, especially to a buyer that may only want GARMIN Electronics. In short, with the marine electronics industry changing so fast, what is top of the line this year may be considered obsolete next year. Yes, we take electronics into consideration when giving a seller a boat market evaluation, but how the vessel was (and is) maintained overall far outweighs the electronics package.

At GOLDEN GATE BOAT SALES.com we offer a realistic, no obligation, Boat Market Evaluation backed by over fifteen years of experience. Our Sales Team is ready to assist you with the value, marketing process and closing process to make sure you receive the most cash out of your boat sale as possible. The poor state of our economy has brought out more scammers than ever before and why using a Licensed and Bonded Yacht & Ship Broker is the only way to go. Don't ever be afraid to ask to see a Yacht Broker's License and Credentials...after all, it's your boat and it's your money!

   

GOLDEN GATE BOAT SALES.com
Phone: 239-430-BOAT(2628)








HELPFUL BOAT TRANSPORT INFORMATION offered by GOLDEN GATE BOAT SALES


Take the time to plan for your boat move. Proper preparation of your boat for transport requires careful planning and attention to detail on both the part of the owner and the boat transport service companies involved. Proper preparation of the boat for transport is the responsibility of the owner. Boat Transport companies do not typically prepare boats for transport. Marinas and boat yards personnel prepare boats and yachts for transport and typically will only allow their employees to prepare boats while on their property. If you need assistance with Preparing De/Re-Commissioning your vessel, boat transport agents can help by working with you to select a Full Service Marina, Boatyard, Captain, or Marine Surveyor to accommodate your needs. If boat is not properly prepared for shipment, boat will typically be transported "as is" and carrier will not accept responsibility for any resulting damage.

Choose a Professional Boat Transport Company experienced in moving your type boat. A successful boat transport company and their drivers must have combined experience working with DOT, permit agencies, marinas, boat yards, and ports to offers better savings to you by avoiding costly delays. Also confirm the MC number which reflects that the transport company is authorized to be hired to haul and is insured. Drivers are instructed not to move the load in any circumstance they regard as unsafe. At the sole discretion of the driver, he may decline to accept any load which he believes to be inherently unsafe for any reason. Experienced, dedicated drivers have the knowledge and driving skills to transport your boat safely and professionally. They are all highly trained and experienced at transporting over width and over height boats nationwide. It is critical to the safety of your boat to be sure oversized yachts being moved use the required escorts and high poles when state regulations require them. Professional boat hauling and yacht transporting drivers know how the boat must be supported, balanced, stabilized and secured. They know how to properly distribute the weight on both the boat, and the trailer axles and how to correctly secure the boat to the trailer. The dispatcher must match the right boat trailer and driver for the proper transport of your boat. The driver will complete a thorough condition check of your boat prior to loading and again at offloading.

Communicate with your Boat Transportation Company. These boat transporting companies are grateful for:

- Having the boat ready to load when the truck arrives at its scheduled time. Besides having to pay the driver for unnecessary delay, this also causes the boat transporting company to get behind on the other boats they have scheduled for transport. Transport companies do their best to deliver the boat at the estimated time. However, this is an approximation only due to the many factors beyond their control such as weather, traffic, permitted re-routes, and availability of marina operations for loading and offloading schedules.
-Your participation and cooperation to prepare your boat for a safe transport as outlined in this document.
-Boat transport preparation done by an experienced boat yard. We recommend for boats 30 feet and up, the preparation be supervised or inspected by a licensed marine surveyor (see below for How to Prepare for a Marine Survey).
-Your understanding that transporters will not be responsible for damage to or caused from improper preparation or loading by the shipper for faulty or defective cradles, trailers, chains, binders, or other equipment provided by the shipper to secure the cargo. This includes anything that shakes loose, becomes unattached, drops, falls or breaks. Bear in mind these are not the result of driver negligence but are due to road vibration and high winds that are a normal part of boat transport and would happen no matter who was transporting your boat.
-Your consideration that if your boat is being moved at 60 miles per hour into a 14 mile per hour head wind, it is experiencing hurricane force conditions, as well as any inclement weather that may be encountered en-route. Please expect normal road dirt on the boat.

Measuring Your Boat for Transport. Properly Measure Your Boat for Transport. When requesting a quote to transport your boat, the dimensions are extremely important. Please follow these guidelines for measuring your boat accurately. In order to transport your boat for the lowest possible price, boat transporters try to carry more than one small boat going in the same general direction at the same time. That is why it is important for the boat transporter to know the full overall length of your vessel in order to know what boats will fit on the trailers. OVERALL LENGTH: Include bow pulpits, swim platforms, outboard motor brackets, outboard motors themselves (the length of the motors or out drives in the raised position). If on a trailer, include from the tip of the tongue to the end of the motor. OVERALL HEIGHT: The maximum height of many overpasses is 13 feet 6 inches. Many oversized yachts require wide-belly low-boy trailers in order for the keel to set down low. Using these type trailers for tall yachts can sometimes be low enough to avoid using a pole car if the boat loaded is less than the state-by-state height restraint (the New England area has many low bridges and re-routes may be dictated by the Department of Transportation. Boats with an overall height greater than 13.6' loaded on the trailer require special handling and routing. It is critical to measure from the bottom of the keel to the highest non-removable part of the boat. The DRAFT(from the waterline to the bottom of the keel) + clearance (from the waterline to the highest part of the vessel) equal the total standing height. Pending on your model, if the fly or command bridge may need to be removed. It is important to measure the vessel without the bridge and also provide bridge dimensions to ensure appropriate transport space. Remember measure twice - cut once! The bridge should be placed somewhere suitable on the boat and make certain it is safely secured. If it must be placed on the trailer, a frame should be prepared for it to rest upon. If your radar arch is removed, it should be secured against your boat. You might consider using carpet to protect areas where surfaces may "touch". Electronics such as radios, Loran Systems, etc., should be shipped separately or securely stowed in your cabin, with all cabin doors, windows, and any other access, locked. OVERALL BEAM/WIDTH: The beam of your boat is the measured as the widest point of the boat including anything attached to the boat. Choose the right marina for your boat transport. Here are some basic questions to ask when choosing a marina for your boat:
- Do they have a travel lift or fork lift to load or offload your boat?
- If necessary, can they shrink-wrap or cradle your boat for international transport?
- Do they have a service bay for disassembly or reassembly of the radar arch or fly/command bridge?
- Can they assist with the preparation of the boat for transport?
- Does the facility have enough overhead clearance, free from low-lying trees and branches?

Understand how payment is to be made for both the boat transport service and the marina loading/offloading or providing preparation service to your boat is going to work. Typically, once a rate to transport is agreed upon, a deposit payable to the Boat Transport company is taken to secure booking, boat coordination fee, and in some cases permits and escorts. Prior to delivery the full balance due is paid by certified check, cash (receipt provided), or wired direct to the Boat Transport company prior to offloading your boat. If you will not be at the offloading destination, arrangements should be made to leave the check with a contact at the marina or the balance be paid ahead of time, prior to offloading. The driver will prepare a condition report upon loading and again at offloading, noting any obvious damage which you or your designated Agent will be asked to sign before the driver leaves. If there is damage to your boat, the freight must still be paid in order to file a claim with the insurance company. Drivers spend much time on the road and it is sometimes difficult to get to the bank while it's not required, a cash tip is greatly appreciated for a job well done!

Remove and properly store the following items...When in doubt, pull it out! This includes valuables, all exterior electronics, anchors, antennas, propellers, flagstaffs, outriggers, any item that extends beyond the stated length, width or height of your vessel, all canvas, screens, cushions, and weatherboards, radar, transmitters, hailers, and dinghies. Check the drain plugs. There should not be any water in the bilge while it is being transported. Drain fuel and water tanks as much as possible. Be sure the tank is no more than 1/4 full. During wither months, water should be drained from the water systems, pumps, and air conditioners. The batteries should be disconnected and the cables tied off to prevent contact. If engine hatch covers are battery operated, they should be secured to prevent their opening while in transit. Check for any loose items or items that could become loose.

Items to be removed inside your boat: All items in the interior cabin should be carefully inspected to make sure they are battened down securely, including hatches. All locker doors should be well secured and locked. All items on deck should be securely lashed down. Normally the driver won't have a key, so any loose items will cause damage. We recommend, you lock the cabin and YOU keep the key.

Items to be removed outside your boat: All electronics, radar, radar arches, hailers, horns, antennas, propellers, flag masts, lights, anchor lights, windshields, etc., must be removed, packed securely and securely stored below. The carrier will not be responsible if they are damaged or if they vibrate off. HATCHES: Hatches should be tightly secured and sealed with tape to prevent damage from wind-driven water. The latches should also be taped securely to prevent the hatch from coming open while in transit and to prevent damage to the boat caused by rain water thru a missing or leaking hatch or deck. A boat will not sit in the same position on the carrier's trailer as it does in the water. COVERS: Remove all canvas covers. Canvas covers, or loose cushion, can be damaged, or do considerable damage, flapping or banging around loose in/with the forced winds and truck movements, which may be even more greatly magnified, if added to any naturally occurring winds, and/or other weather conditions encountered during transport. Canvas covers must be removed as they will tear or fly off during transport.

Check for Zebra Mussels. If you are moving your boat from an infected State, thoroughly inspect your boat. Check engine intake strainers, and all other through-hull fittings. Check drain scuppers, out-drives and all possible areas of attachment. DOT officers are checking boats for Zebra mussels at weigh stations. If zebra mussels are found, your boat will be seized. You will have to arrange for hot water removal, and you may also be required to have your boat launched first in salt water if your intended destination was fresh water.

Decide whether to shrink-wrap your boat or not. Shrink-wrap on oversize yacht transport is NOT RECOMMENDED. While Shrink-wrap can protect the boat from road tar and dirt, it is RECOMMENDED your money be spent on a good wash down at delivery. Shrink-wrap can and does tear or fly-off during transit. This can cause considerable damage from beating against the boat and chaffing. Drivers carry tape, and will try to repair it if possible. If they can't, they will have to remove it. Keep in mind that the driver's view is often obstructed, and at night he can't always see that the shrink-wrap has torn. Nor can the driver hear the shrink-wrap flapping or "wind-milling." They are not responsible for damage caused by shrink-wrap, canvas covering or any other cover. In some cases, you may be charged for the boat transporter's time to remove the Shrink-wrap. Shrink-wrap is recommended for international boat and trailer shipping. While it is not necessary it is a good deterrent for break-ins and provides some base security.

Properly store your dinghy. Dinghies can not be transported on its davits. The dinghy should be stored in the cabin or securely lashed and padded in the cockpit. If you are shipping a dinghy on board or if you have had to remove any superstructure, these items should be well padded. DO NOT leave dinghy on davits.

Additional instructions for transporting your wood boat. It is highly recommended that wood boats be transported on their own custom cradle. This is suggested because there may be inherent structural weaknesses that are not readily visible or detectable. A well designed cradle will spread the weight of the boat over a much wider contact area. Wooden boats can be expected to dry out. A coat of linseed oil will help. Most boat transport companies will ask you to sign a release of liability for wood boats.

Additional Instructions for Power Boat Transporting. Make certain that your windshield is strong enough to withstand the rigors and wind of travel. Confirm the seal is tight and screws holding it in place are not corroded. In some cases, oversize yachts are hauled backwards creating an even greater force of wind pressure. When in the least doubt ... REMOVE and SAFELY SECURE IT. Please NOTE: If not removed ... frameless Plexiglas windshields WILL BREAK!!! Take precautionary measures!!! Any inboard/outboard or outboard motors should be raised and locked. It is sometimes prudent to place a 2 x 4 securely between your out-drive and bracket. Whenever possible, you should consider removing the props and safely storing them.

Additional Instructions for Sail Boat Transporting. Make certain that all Mast Poles are un-stepped and de-rigged. All cables and spreaders should be bound to the pole. ALL rigging, winches, wind indicators, and lights must be removed from the mast. The strongest side of the mast should be left "clean" to rest on our trailer. Wrapping of poles is optional, but should be considered. Carpet should be provided for the mast at the points of tie down. Expect some chafing at these points. If the mast is painted, it is almost impossible to keep the paint from chafing. The carrier will not pay to repaint masts if chafing occurs. Do not secure the mast to the boat, as there is a space on the carriers trailer for the mast. Should the mast be secured to the boat, the carrier will not be responsible for any resulting damage to the mast or the boat. Life lines, stanchions, bow and stern pulpits should be removed if they render the boat over height. On center board sailboats, make sure the board is secured and will stay up in transit. Keel sailboats may expect some separation where the keel joins the hull. This is not structural damage, but rather is the paint or filler cracking at the joint. Light built or racing sailboats can expect some hull indentation from the support pads. These indentations generally disappear when the boat is returned to the water. Rudders, sticks, ladders, outboards, and anything else that can turn or flap in the wind, should be removed and/or well secured.

Additional Instructions for International Boat Transporting. There are options available for different types of overseas shipping: Ro/Ro (Roll-on / Roll-off): This requires your boat to be on its own trailer, or a trailer provided by the ship line. The cargo moves as one piece on a specialized trailer from port to port. Enclosed Container: Most liner vessels around the world today are full container vessels. If your boat fits the dimensions of a standard container (40' long, 7'8" wide and 7'10" high). These vessels are perfect for cargo that fits neatly into a standard 20'or 40' container. Flat Rack: This option is typically used for oversized boat. A cradle is built to support the vessel. A flat rack and strap is used to secure your boat to the vessel. We recommend shrink wrapping the boat to protect if from damage or debris getting into your boat during its international shipment. When shipping an oversized boat, we recommend that the manufacturer will disassemble certain parts from the boat such as engines in smaller boats, upper cockpits, bimini top, etc. Submersion: Your boat is loaded and unloaded directly from the water. Ship lines are on a first-come/first serve booking system and estimate the ship sail schedule and delivery. The time frames given are estimations and not guaranteed schedules.

Check that your cradle is suitable for boat transport overland or international shipping. If you have a cradle for transporting your boat, please inspect it carefully for fit, loose bolts, strength and structural integrity. If your cradle breaks in transit, causing damage to your boat, the carrier cannot accept responsibility. They will not assume liability for any damage that results from the failure of your boat's cradle. If you are shipping your boat overseas, it is critical to use a knowledgeable, experienced agent well versed in overseas and international requirements.

Inspect your trailer for boat transport road worthiness. If you are transporting your boat on its own trailer, inspect your trailer to ensure it is roadworthy. Check tires for wear, dry rot and proper tire inflation pressure and be sure the tread is sufficient and that there are no cracks, bubbles or gouges in the rubber. If the tires are dry rotted, replace them. Old tires are tired, so replace them and avoid a costly and dangerous blowout. A spare tire is required. Remove wheels and hubs; inspect hubs for wear and rough surfaces, turn drums if necessary. Service or replace the wheel bearings. Many breakdowns occur due to neglect in this area. If the bearings have not been maintained on a strict schedule or it has been more than 6 months since they were last checked, please have this professionally done. Travel builds up tremendous heat in bearings that have not been properly maintained, easily causing their failure. Bearings exposed to salt water are especially vulnerable. Remove bearings; inspect bearings for wear. If you replace bearings, also replace races and seals. If bearings are OK, repack and install new seals. Trailers with surge breaks: inspect brakes and hubs for wear, replace brakes and turn hubs if necessary, also check brake fluid level. Check springs, shackles and bushings for wear and corrosion, replace as necessary. Remember, salt water will destroy trailer wheels, springs and axles if not properly rinsed after each use in salt water. Check all lights, plug must be in good condition, turn signals and brake lights must work properly, all marker lights must work properly, repair or replace as necessary. Check the lighting system for proper operation and make sure wires are in good condition. If repairs need to be made, have them done well in advance of the pickup date. This work should be done by a professional or someone very knowledgeable on trailers. Please take the time to make your trailer TRULY ROADWORTHY. It is much more expensive if you break down on the Interstate. The Boat Transport Company cannot be responsible for your trailer if it is not in excellent condition. Please do not ask them to transport a boat on a trailer that is not fit for travel. They cannot afford to jeopardize their safety or equipment, or your boat. You will be responsible for any repairs, damage or problems caused by your trailer. Unnecessary breakdowns are far more costly than routine maintenance.

Decide if you want a marine survey done prior to transporting your boat. Time and additional expense can be saved by preparing the vessel for inspection and making her more accessible. Arrange to present a clean, shipshape boat, and have all papers and miscellaneous gear ready. If applicable, you will need to make arrangements with the marina to haul the vessel for bottom inspection, and retain a captain for sea trials. Lockers and cabin areas should be cleared of all miscellaneous gear. The surveyor should never be asked to prepare a boat for inspection. The surveyor may request minor dismantling of interior ceilings, headliners, flooring, etc. in order to gain access to the suspected areas. Random removal and examination of below-the-waterline fasteners on wood boats may be required. Any dismantling and re-installation of parts should be performed by qualified personnel and is the responsibility of the person ordering the survey. Written authorization from the owner may be needed to board and/or to remove part of the vessel the vessel. Once you retain the Surveyor, he or she works only for you and reports to no one else. The Surveyor is there to protect your interest. Marine Yacht Surveying does NOT "pass" or "fail" vessels. The findings are reported, basic recommendations are given, and an opinion as to the "Fair Market Value" of the vessel is stated. As a buyer only you can determine whether the vessel meets your requirements based on our report. Marine Yacht Surveying does NOT make insurance or financing decisions. The surveyor reports observations which insurance or financing companies take into consideration to arrive at their decisions. Marine Yacht Survey Report should include:
- A detailed description of the yacht and its systems.
- Notes on conditions which affect the vessel's value and suitability for its intended service.
- Recommendations regarding safety, necessary repairs and maintenance.
- Estimated current fair market value of the vessel. Estimated replacement cost.
- Photographs of the vessel and any unusual features or problems.

A successful boat transport company and their drivers must have combined experience working with DOT, permit agencies, marinas, boat yards, and ports offers better savings to you, by avoiding costly delays. Drivers are instructed not to move the load in any circumstance they regard as unsafe. At the sole discretion of the driver, he may decline to accept any load which he believes to be inherently unsafe for any reason.

Experienced, dedicated drivers have the knowledge and driving skills to transport your boat safely and professionally. They are all highly trained and experienced at transporting over width and over height boats nationwide. We always use the required escorts and high poles, when state regulations require them. Professional boat transport and yacht hauling drivers know how the boat must be supported, balanced, stabilized and secured. They know how to properly distribute the weight on both the boat, and the trailer axels and how to correctly secure the boat to the trailer. Professional boat transport companies will correctly match the right boat trailer and driver for the proper transport of your boat.

For more information, links to shippers and helpful vessel transport tips, visit this direct link at BOAT SHIPPING.

We hope you found this information helpful and welcome your questions and comments.